Refrigerator, dryer and washer repair in Studio City · 91604 · 91602 · open daily 8 AM to 7 PMCall (747) 325-5782
Studio City
Appliance Repair Co.In-home repair, Studio City CA
(747) 325-5782
Home › Refrigerator repair

Refrigerator repair in Studio City

Quick answer: most refrigerators that stop cooling have an airflow or defrost problem, not a dead compressor. The common causes are dusty condenser coils, a stopped fan, frost blocking the evaporator, or a failed start relay or control board. We test each one in your home, give you one price, and repair it with a 90-day warranty.

Symptoms and the usual cause

What you seeMost common causes
Freezer cold, fresh-food section warmEvaporator frosted over (defrost heater, sensor or timer), evaporator fan stopped, air damper stuck
Both sections warm, compressor clickingStart relay or overload, condenser fan stopped, dirty condenser coils, control board
Ice maker not making iceWater inlet valve, frozen fill tube, ice maker module, freezer not cold enough
Water on the floor or under the crispersClogged defrost drain, cracked drain pan, leaking supply line
Loud buzzing, rattling or tickingFan blade hitting ice or debris, worn fan motor, drain pan rattle
Runs all the time, food not cold enoughCondenser coils packed with dust, door gasket not sealing, low airflow in a tight cabinet

Studio City kitchens and garages

In apartment kitchens the refrigerator is often pushed tight into a cabinet opening, and the lack of space behind it traps heat around the condenser. In houses, many families keep a second refrigerator in the garage, and on a hot Valley afternoon a garage can be far warmer than the kitchen. Both situations make the refrigerator run longer and hotter, which is why we check airflow and coils on every call, not only the part that looks broken.

What you can check before you call

If food has been above 40°F for more than two hours, throw out perishables. Move what you can to a cooler while you wait for the repair.

Brands

We work on Samsung, LG, Whirlpool, GE, Frigidaire, KitchenAid, Maytag, Bosch and built-in refrigerators such as Sub-Zero. Have the model number ready when you call; it is usually on a sticker inside the fresh-food section. More on our brands page.

Guides

Common questions

Why is my refrigerator not cooling but the freezer works?

Cold air reaches the fresh-food section from the freezer. If the evaporator is covered in frost or the evaporator fan stops, the freezer can stay cold while the fridge warms up. A failed defrost heater, defrost sensor or damper is the usual cause.

Is it worth repairing a refrigerator?

Usually yes when the problem is a fan, relay, defrost part, valve or control board. A sealed-system problem on an older budget refrigerator is often not worth it. We give you the price first so you can decide.

How long does a refrigerator repair take?

Many repairs are finished in one visit. If a part must be ordered, we schedule a second visit once it arrives.

Do you repair Sub-Zero and other built-in refrigerators?

Yes. Built-in units have their condenser at the top and need careful access in the cabinet, and we work on them regularly.

Appliance down in Studio City?

Call, tell us the brand and what it is doing, and we will set a visit time.

(747) 325-5782
  Call (747) 325-5782